high efficiency glass passivated rectifier e-mail: sales@cnmic.com web site: www.cnmic.com voltage range 50 to 1000 volts HER1601 thru her1607 current 16.0 ampere features high speed switching glass passivated chip junction low power loss for high efficiency low leakage high surge capacity high temperature soldering guaranteed 250 /10 second, 0.16 (4.06mm) lead length also available in reverse polarity, add the r suffix, i.e. HER1601r also available in an isolated package, herf1601 mechanical data case: transfer molded plastic epoxy: ul94v-0 rate flame retardant lead: solderable per mil-std-202e method 208c polarity: as marked mounting position: any, 5 in-lbs torque max weight: 0.08ounce, 2.24 gram maximum ratings and electrical characteristics ratings at 25 ambient temperature unless otherwise specified single phase, half wave, 60hz, resistive or inductive load for capacitive load derate current by 20% symbols her 1601 her 1602 her 1603 her 1604 her 1605 her 1606 her 1607 unit maximum repetitive peak reverse voltage v rrm 50 100 200 300 400 600 800 volts maximum rms voltage v rms 35 70 140 210 280 420 560 volts maximum dc blocking voltage v dc 50 100 200 300 400 600 800 volts maximum average forward rectified current at tc=100 i (av) 16.0 amps peak forward surge current 8.3ms single half sine wave superimposed on rated load (jedec method) i fsm 225 amps maximum instantaneous forward voltage per at 16.0a v f 1.0 1.3 1.5 1.7 volts t a = 25 10 maximum dc reverse current at rated dc blocking voltage at t a = 125 i r 500 a maximum reverse recovery time test conditions i f =0.5a, i r =1.0a, i rr =0.25a t rr 70 100 ns typical junction capacitance (measured at 1.0mhz and applied reverse voltage of 4.0v) c j 40 pf typical thermal resistance (note 1) r jc 2.5 /w operating junction temperature t j (-55 to +150) storage temperature range t stg (-55 to +150) notes: 1. unit mounted on heatsink dimensions in inches and (millimeters) to-220ac
high efficiency glass passivated rectifier e-mail: sales@cnmic.com web site: www.cnmic.com voltage range 50 to 1000 volts HER1601 thru her1607 current 16.0 ampere rating and chracteristic curves HER1601 thru her1607 fig.2-maximum non-repetitive peak 100 t jmax 40 20 10 2 300 1 0 c u r r e n t , ( a ) p e a k f o r w a r d s u r g e 10 number of cycles at 60 hz 8.3ms single half sine-wave (jedec method) t= forward surge current fig.4-typical reverse derating curve fig.1-typical forward current 150 175 125 75 100 16 50 0 0 single phase inductive load half wave 60hz resistive or 25 a v e r a g e f o r w a r d c u r r e n t , ( a ) fig.3-typical instantaneous ambient temperature, ( c) 80 40 100 ( a ) ( a ) ( a ) reverse voltage,(v) i n s t a n t a n e o u s f o r w a r d c u r r e n t , i n s t a n t a n e o u s r e v e r s e c u r r e n t , 0.375 (9.5mm) 468 1 cycle 60 percent of rated peak reverse voltage,(%) 1.0 0.1 0.01 8.0 24 lead length 200 100 60 20 0 120140 t =25 c j 50/100ns/cm set time base for 0 -1.0a -0.25a +0.5a (+) (-) (-) (approx.) (+) 25 vdc 10 noninductive noninductive 50 (note 1) oscilloscope (note 2) generatior pulse d.u.t. inductive non 1 2.rise time=10ns max. source impedance= 50 ohms 1 magohm. 22pf notes : 1.rise time=7ns mas. input impedance= reverse recovery time characteristic f1g.6-test circuit diagram and 1cm trr t =125 c j j 100 10 1.0 t =25 c f=1mhz j u n c t i o n c a p a c i t a n c e , ( p f ) vsig=50mvp-p 1 0.1 10 100 100 20 12 4.0 forward characteristics per leg 6 0 0 / 8 0 0 v 3 0 0 / 4 0 0 v 5 0 / 1 0 0 / 2 0 0 v 0.1 1.0 10 100 1.6 instantaneous forward voltage,(v) pulse width=300us 1% duty cycle 0.4 0.8 t =25 c j 1.2 fig.5-typical junction capacitance per leg characteristics per leg
|
